A Pdms Sheath Flow Cuvette For High


Vernier products are designed specifically for education and held to high standards. Post-column reactor of coaxial-gap mode for laser-induced fluorescence detection in capillary electrophoresis. Due to our affluent industry acquaintance, we present Disposable Cuvette. In addition, experts check these products on varied industry norms to make sure the top quality. Pkg of 50, 0.1cm–gap sterile electroporation cuvette, for use with the Gene Pulser and MicroPulser Systems, for mammalian and other eukaryotic cells.

All spectrophotometer cells are completely fused without the use of low melting intermediate glasses or cements. In other words, quartz is fused to quartz and glass is fused to glass. This eliminates strains due to differences in coefficients of expansion found in cells fused with intermediate low melting temperature glasses. Because of the fused construction, the window joints of ICL spectrophotometer cells are unaffected by all types of cleaning solutions.

  • Cuvettes to be used in circular dichroism experiments should never be mechanically stressed, as the stress will induce birefringence in the quartz and affect measurements.
  • Pkg of 50, 0.1cm–gap sterile electroporation cuvette, for use with the Gene Pulser and MicroPulser Systems, for mammalian and other eukaryotic cells.
  • You want to be confident in your choice and the capabilities of both your cuvette and the instrument.
  • Same as Type 30 but with 4 clear windows and clear bottom.
  • They are made from quartz, plastic, polycarbonates or glass in various sizes and are scratch-resistant.


If you can’t find what you are looking for, we can also supply custom cuvettes to match your design and exact specifications. Contact us today for specifications or for more information on our customised service. Apart from these characteristics, there is another benefit of quartz, cuvette i.e., the highest temperature resistance.

Industrial Solutions

Our products support state requirements for NGSS, AP, and more. Transparent to the wavelength of light required for the purpose. Absorbance studies have become a base for examining various solutions and particles. Under these, the light gets passed through the solutions in a defined format. BrandTech also manufacuresUV CuvettesandVis (PS/ PMMA) Cuvettes. PS and UV-cuvettes can be used in temperaures up to 70 °C.

A cuvette is a piece of laboratory equipment that is intended to hold samples for spectroscopic analysis. While cuvettes can be made of various materials, plastic cuvettes have the advantage of being less expensive and disposable and are often used in fast spectroscopic assays. UV quartz cuvettes are designed to hold samples for spectroscopic experiments. We offer both quartz cuvettes with two polished sides for absorption spectroscopy, and quartz cuvettes with four polished sides for fluorescence spectroscopy. Pipette.com offers a range of standard, UV and fluorimetry cuvettes and micro-cuvettes to fit the needs of any laboratory performing spectroscopic measurements.

One Standard Glass Flowing Cuvette Type G, 10 Mm Light Path, 2

Consider how different sizes and optical materials will influence your processes and choose the appropriate type to get precise results. The cuvette must match your application to yield accurate information on concentration and purity. In order to choose one, the specific use and equipment have to be defined. For example, plastic may not be efficient for UV-range experiments, but it is a cost-effective alternative for all the visible light studies. Plastic cuvettes are often used in fast spectroscopic assays, where high speed is more important than high accuracy. Plastic cuvettes with a usable wavelength range of 380–780nm may be disposed of after use, preventing contamination from re-use.


Disposable Cuvette

Sheath-flow cuvette for high-sensitivity laser-induced fluorescence detection in capillary electrophoresis. These cuvettes enable you to use the minimum amount of solution, therefore you can conduct more experiments than you would normally be able to. A standard 10 mm square cuvette is actually 12.5 mm measured from the outside. Its wall thickness of 1.25 mm brings the measuring space to 10 mm, the same dimension used for most spectrometer chambers. Macro cuvettes hold a measuring volume greater than 3.5 mL. Among these types are common cuvettes ranging from 7 to 35 mL.